|
AR-B1793
|
Pentium M, VGA, 10/100/1000 LAN,CF+ Type II, PCI Slot, Mini-PCI Slot, 2 Serial Ports, 4 USB 2.0 Ports
|
|
Specifications |
|
|
| |
|
|
General |
| |
|
|
System: |
|
CPU Grade : Supports Pentium-M CPUs with 1.3GHz
BIOS : AWARD
System Chipset : Intel 852GM + Intel ICH4 chipset (82801DB) I/O Controller
Certification : CE, FCC Class A
Supporting OS : Linux 6.5 and above, Win95/98/2000/Me/NT/XP |
| |
|
|
Memory: |
|
RAM : DDR200/266 DDR SDRAM
System Memory : 128MB/256MB on-board & one SODIMM Slot for up to 768 MB memory |
| |
|
|
Ethernet: |
|
Interface : 10/100/1000 Mbps LAN
LAN chipsets : Broadcom x 4 (BCM-5788. GIGA LAN)
Connector : RJ-45 with built-in LED x4 |
| |
|
|
Drive Bay: |
|
2.5" HDD : 1 (optional)
3.5" HDD : 1 (optional) |
| |
|
|
Cooling: |
|
System FAN : 1
CPU FAN : Slim Cooling FAN |
| |
|
|
I/O Interface: |
|
USB: 4 (USB 2.0) (2 external (rear I/O panel), 2 internal (pin-header)
Serial Port : 1 x RS232 external connector, 1 x RS232/422/485 with pin-header
Parallel Port : On-board 25-pin headers for LPT1 , supports SPP/EPP/ECP modes
(rear I/O panel) pin-headers
Mini PCI Interface : 1 (3.3V Mini PCI connector, Internal)
Expansion Interface : 1 (32-bit PCI Expansion Slot)
VGA interface : CRT - D-SUB 15-pin female connector
PS/2 : 2 (Mouse x 1, Keyboard x 1)
GPIO : 8 Independent I/O Lines, TTL level
IDE : one on-board 2.00mm 44 pin-header
one on-board 2.54mm 40 pin-header
Supports Ultra DMA 33/66/100/133 |
| |
|
|
Management: |
|
Indicator : 1x Power LED, 1x Hard drive LED, 8 LEDs for Network connect as ACT and Link |
| |
|
|
Miscellaneous: |
|
Control : Power Switch
Solid State Disk : 1 (Compact Flash Type II)
Watchdog Timer : Software programmable 1~63 seconds
Bypass : Support 2 pairs bypass function(Optional)
RTC : Chipset included, supports ACPI function with 7 years data retention
Bypass LAN : Support 2 pairs bypass function(Optional) |
| |
|
|
Environment: |
|
Operating Temperature : 0 ~ 40 °
Storage Temperature : -20 ~ 80 ° C (-4 ~ 176 ° F)
Operating Humidity : 0 ~ 90% Relative humidity non-condensing
Power Requirement : +12V Input; 50W AC power Adapter, Input
range 115V AC 60GHz ~ 230V AC 50Hz/ ATX power connector (10 pins)
Physical: Dimension (W x D) 164mm x 216mm (6.45" x 8.50") (ECC function not supported) |
| |
|
|
| |
|
|
| Top |
| |
|
|
|
|
