Specifications |
|
|
|
|
|
General |
|
|
|
Standard: |
|
IEEE 802.3 10Base-T Ethernet,
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN |
|
|
|
Management: |
|
Web-interface management and one default button for
system default settings |
|
|
|
Protocol: |
|
CSMA/CD |
|
|
|
Technology: |
|
Store and forward switching architecture |
|
|
|
Transfer Rate: |
|
14,880 pps for Ethernet port and 148,800 pps for Fast
Ethernet port |
|
|
|
Packet Filter: |
|
Broadcast packet filtering |
|
|
|
MAC Address: |
|
2K MAC address table |
|
|
|
Memory Buffer: |
|
1Mbits |
|
|
|
Network Cable: |
|
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m) |
|
|
|
LED: |
|
Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green), Fault (Red), R.M (Orange) |
|
|
|
Back-plane: |
|
1.0 Gbps |
|
|
|
Number of Ports: |
|
5 x 10/100 Base-TX |
|
|
|
Power Supply: |
|
12 to 48 VDC. Redundant power inputs with reverse
polarity protection. A removable terminal block for
master and slave power. |
|
|
|
Power Consumption: |
|
3.5 Watts |
|
|
|
Super Ring: |
|
Two ports of switch for Super Ring to provide redundant backup
paths. The recovery time is less than 300ms. Super Ring can
be activated by web-interface management. |
|
|
|
VLAN: |
|
Supports Port-based VLAN and IEEE802.1Q Tag VLAN |
|
|
|
Installation: |
|
Provides DIN rail kit and wall mount ear for 3-way installation |
|
|
|
Quality of Service: |
|
Four queues per port are supported in Hardware |
|
|
|
Alarm: |
|
Relay output for port breakdown and power failure.
provide DIP switch to mask link down port |
|
|
|
Operating Temperature: |
|
-10°C to 70°C (14°F to 158°F) |
|
|
|
Operating Humidity: |
|
5% to 95% (Non-condensing) |
|
|
|
Storage Temperature: |
|
-40°C to 85°C (-40°F to 185°F) |
|
|
|
Case Dimensions: |
|
IP-30, 53 mm (W) x 135 mm (H) x 105mm (D) |
|
|
|
EMI: |
|
FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN-6100-4-4, |
|
|
|
Safety: |
|
CE EN6100-4-5, CE EN6100-4-4 |
|
|
|
Stability testing: |
|
UL, cUL, CE/EN60950 |
|
|
|
MTBF: |
|
319,175 hours
*Calculated MTBF is based on MIL-HDBK-217F
(MILITARY HANDBOOK) standard
(This standardization handbook was developed by the US
Department of Defense with the assistance of the military
departments, federal agencies, and industry) |
|
|
|
|
|
|
Top |
|
|
|